Battelle Hall 334

Building: Battelle Hall of Science and Nursing
Room: 334 (Skills Lab)
Capacity:
Schedule: School of Nursing

• Overhead Projector
• Data Projector
• Windows XP computer with DVD playback capability
• VHS video recorder w/CATV tuner

Remote control: Wired
Projector Type: DP-6155

Data Projector Operation:

To turn the projector ON:

To turn the projector OFF:

• Press the POWER button on the remote control.
  

  This message will appear on the screen: "Turn off projector?"

• Press the POWER button again to shut off the lamp.
  

  Note: After you shut off the projector, do not attempt to restart for at least five minutes.

To project from the classroom computer:

• Make sure the computer is ON
• Make sure the A/B switch is set to A (Classroom Computer)
• If you are getting video from the VCR or a blue screen, turn the VCR OFF.

To project from the VCR:

• Make sure the VCR is ON
• If you are getting a computer signal, set the A/B switch to B
  

  You will not see the video from the VCR on the computer monitor.

To project from your own computer:

• Connect your computer to the loose monitor cable coming up through the tabletop.
• Set the A/B switch to B (Laptop Computer)
• If you are getting video from the VCR or a blue screen, turn off the VCR.
  You will see the signal from the laptop on the computer monitor.
  

  For best results, use the projector's native screen resolution, 1024 x 768 pixels. Your computer may require a special key sequence or control panel setting to work with an external display. When in doubt, consult the manufacturer's manual.

Please turn the projector OFF when you finish!

If you have problems:
Call the Information Technology Help Desk at x6508 614-236-6508.

Created 06/21/2005
Updated 06/21/2005