Battelle Hall 123

Building: Battelle Hall of Science and Nursing
Room: 123
Capacity: 40
Schedule: Meeting and Event Services

• Overhead Projector
• Data Projector
• Windows XP computer with DVD playback capability
• VHS video recorder w/CATV tuner

Remote control: Infra-red
Projector Type: DP-6150

Data Projector Operation:

To turn the projector ON:

• Make sure the slide switch on the side of the remote control is set to ON
• Point the remote control at the projector
• Press the POWER button
  

  Note: The projector will beep once. It will take up to a minute for the projector to reach full brightness.

To turn the projector OFF:

• Make sure the slide switch on the side of the remote control is set to ON
• Point the remote control at the projector
• Press the POWER button.
  

  A message will appear on the screen: "Turn off projector?"

• Press the POWER button again to shut off the lamp.
  

  Note: After you shut off the projector, do not attempt to restart for at least five minutes.

To project from the classroom computer:

• Make sure the computer is ON
• Make sure the A/B/C/D switch is set to A (Classroom Computer)

To project from the VCR:

• Make sure the VCR is ON
• Set the A/B/C/D switch to B (VCR)
  

  You will see the video from the VCR on the computer monitor as well as on the projection screen.

To project from your own computer:

• Connect your computer to the loose monitor cable coming up through the tabletop.
• Set the A/B/C/D switch to C (Laptop Computer)
  

  For best results, use the projector's native screen resolution, 1024 x 768 pixels. Your computer may require a special key sequence or control panel setting to work with an external display. When in doubt, consult the manufacturer's manual.

Please turn OFF the projector when you finish!

If you have problems:
Call Information Technology Help Desk at x6508 614-236-6508.

Created 06/21/2005
Updated 06/28/2005