Battelle Hall 103

Building: Battelle Hall of Science and Nursing
Room: 103
Capacity: 80
Schedule: Meeting and Event Services

• Overhead Projector
• Data Projector
• Windows XP computer with DVD playback capability
• VHS video recorder w/CATV tuner
• PA speaker for back of room

Remote control: None
Projector Type: LP-820

Data Projector Operation:

To turn the projector ON:

• Turn ON the "Projector Power" switch next to the projection screen.
• WAIT approximately fifteen seconds. The projector will chime, then turn on.
  

  Note: The projector will chime once. It will take up to a minute for the projector to reach full brightness.

To turn the projector OFF:

• Turn OFF the "Projector Power" switch next to the projection screen
  

  Note: After you shut off the projector, do not attempt to restart for at least five minutes.

To project from the classroom computer:

• Make sure the computer is ON
• Make sure the A/B/C/D switch is set to A (Classroom Computer)

To project from the VCR:

• Make sure the VCR is ON
• Set the A/B/C/D switch to B (VCR)
  

  You will see the video from the VCR on the computer monitor as well as on the projection screen.

To project from your own computer:

• Connect your computer to the loose monitor cable coming up through the tabletop.
• Set the A/B/C/D switch to C (Laptop Computer)
  

  For best results, use the projector's native screen resolution, 1024 x 768 pixels. Your computer may require a special key sequence or control panel setting to work with an external display. When in doubt, consult the manufacturer's manual. You will see your laptop display on the computer monitor as well as on the projection screen.

Please turn the projector OFF when you finish!

If you have problems:
Call the Information Technology Help Desk at x6508 614-236-6508.

Created 06/21/2005
Updated 11/14/2005